== Keysight B150xA Series Easy Test Navigator Software 1.1.16.0 Release Notes ==

== CORRESPONDING FIRMWARE REVISION ==
This revision of software works with the following firmware.

  - B150xA Series: A.05.61 or later

== NEW FEATURES ==

  - Oscilloscope View in I/V Measurement

  - Component Test in Datasheet Characterization

  - IGBT support in Power Loss Calculation

  - Output Capacitance Loss in Power Loss Calculation

  - [9512] [Datasheet] Saving in text format is to be supported.

== IMPROVEMENTS ==

  - [9456] [Device Capacitance] Immittance data component displayed on graph is to be saved in data file.
  - [9457] [IV] RGS for graph data is to be supported.
  - [9469] [Graph] Data and scale setting are to be saved in setup file.
  - [9482] [Graph] Polarity of end points are to be kept for changing with mouse wheel operation.
  - [9483] [Graph] Support of simple operation for changing graph scale using mouse.
  - [9497] [Datasheet] Alias for data name in graph trace label is to be supported for appropriate expression.
  - [9503] [Gate Charge] S2 of derived JESD24-2 is to be identical to S2 of High Current JESD24-2.
  - [9505] [Gate Charge] S1 of derived JESD24-2 is to be identical to S1 of High Voltage JESD24-2.
  - [9507] [IV] Default aperture and step time for staircase sweep is to be extended.
  - [9514] [Datasheet] Limitation to min./max. range for parameters by related maximum rating is to be supported.
  - [9522] [Power Loss] Default sweep settings are to be updated to practical settings.
  - [9530] [Datasheet] Power compliance is to be applied in MOSFET > VDS-VGS for B1506AH21.
  - [9531] [Datasheet] Improvement in scrolling by scroll button.
  - [9536] [Common] Default input value options for numeric input field.
  - [9541] [Datasheet] Each measurement data is not to be saved in corresponding measurement DataStore in case of Datasheet execution.

== FIXED DEFECTS ==

  - [9454] [Datasheet] Maximum ratings are not applied to duplicated measurement items.
  - [9459] [Graph] Domain marker shift amount by rotary knob is not propotional to domain scale.
  - [9463] [Common] Path for save setup operation is to be nullified by opening data file.
  - [9484] [PowerLoss] Calculation of Irms is not the root mean square of drain current.
  - [9486] [PowerLoss] Inconsistent combination of Id/Ic, Irms and D can be set.
  - [9495] [Common] Input parameter values will be rounded inconsistently.
  - [9515] [PowerLoss] Calculation result of Conduction Loss is incorrect if Id/Ic or D is specified as a sweep parameter.

== REVISION HISTORY ==
<Software 1.0.7.0>
 New Features:

  - Initial release for B1506A and B1507A